Achieving a Show-stopping Gloss Finish with Epoxy Resin

This complete woodworking finishing with epoxy resin guide to using epoxy resin covers everything from choosing the right type of resin to techniques for applying multiple colored layers for stunning effects. Read on to learn the fundamentals of resin finishing to take your wood projects to brilliant new heights.

Epoxy resin has become an incredibly popular finish for woodworkers looking to achieve a dazzling, glass-like shine on tables, bars, coasters, and more. Compared to traditional polyurethane and varnish, epoxy resin provides an ultra high-gloss finish that beautifully highlights wood grains and textures.

Key Takeaways

• Extremely durable, waterproof finish with ultra high gloss

• Seals and protects wood beautifully; resists scratches, stains

• Can embed objects, colors; very creative versatility

• Select proper resin type for coating; know mix ratios

• Prep wood completely – sand, fill holes/cracks, clean fully

• Mix resin/hardener thoroughly; apply in thin layers

• Add ink, mica powder, etc. for colorful effects

• Texture with sand, minerals or embedded items

• Seal porous woods first; no humidity above 85%

• Patience required between layers; follow cure times

The Crystal Clear Benefits of an Epoxy Coating

There are several key reasons epoxy resin has become a favorite for finishing and protecting wood surfaces:

• Extreme Durability: Epoxy bonds tightly to wood, sealing the surface from moisture while resisting heat, scratches and stains far better than other clear coat options. This makes it perfect for heavy-use items like bars or tables.
• Waterproof Protection: The resin fully seals wood from liquids, making it a great choice for items that will sit wet glasses, vases, and more.
• Show-stopping Shine: After curing, epoxy resin has an ultra clear, glass-like finish that visually enhances wood grains. Different application techniques can create even more visual interest.
• Long Lasting: Unlike finishes that require frequent reapplication like oils, one epoxy resin application can last for many years with proper surface preparation.
• Creative Versatility: Colors, textures and objects can be embedded into resin before hardening, allowing for all kinds of artistic experiments!

For woodworkers aiming for breathtaking results that protective the woodwork, epoxy resin coating checks all the boxes. As you’ll read below, proper selection and application is key to unlocking the full potential of resin.

How to Pick the Perfect Epoxy Resin

With various epoxy formulas available, it’s essential to understand the differences when selecting resin for wood finishing:

• Coatings: Perfect for gloss topcoats, these thin viscosity epoxy resins are formulated for coating applications and come in clear finishes optimized for warm, dry environments. Popular picks like Super Sap Crystal Clear or Stone Coat’s Countertop have great UV protection, resist yellowing, and deliver glass-like clarity.
• Sealants & Adhesives: While thick viscosity resins work as adhesives for wood, the slow cure times make them impractical as a topcoat finish. Opt for coating resin instead.
• Mix Ratio: Be sure to buy adequate resin and hardener in the proper mix ratio. Buying separate containers of resin and hardener allows for more finishing flexibility. Common mix ratios are 2:1 or 1:1.
• Cure Time: This determines how long each layer needs to harden before adding the next layer. Fast cure formulas feature 6-8 hour cure times.
• Quantity: Use online calculators to determine how much resin and hardener is needed for the full surface area of the project. Buy 20-30% extra to allow for any issues.

When tackling resin finishing for the first time, beginners may want to practice first with an inexpensive clear epoxy kit specifically made for crafts, bars, and tabletops. This way inevitable initial mistakes won’t be costly and application can be mastered before moving to pricier designer resin options.

Surface Prep – Sand, Clean, Fill and More!

To achieve gorgeous high-gloss results with epoxy resin, the wooden surface must be properly prepped before applying the first coat:

• Sand & Clean: Use 120 grit sandpaper to remove any existing finish or stain, rough up the wood surface, and round sharp corners which can cause pooling. Then clean wood thoroughly with tack cloth.
• Fill Cracks & Holes: Any dents, knots holes and cracks must be filled with epoxy filler which dries crystal clear. This prevents air bubbles from trapped spaces ruining the smooth high gloss.
• Block Porous Woods: Certain extra porous woods like oak or pine need sealing with thinned resin or sanding sealer first or air bubbles may be an issue.
• Secure Project: Make sure not to move or adjust the wood item once coating is started or major runs and drips can occur. Place the item on a level surface and secure if needed.
• Room Temperature: Epoxy cures faster in warmer temperatures – between 75-85°F is recommended so space heaters may be needed in cold areas.
• Humidity Levels: Humidity should not exceed 85% or epoxy resin finishing may fail. Consider using a dehumidifier if needed in damp spaces.

Proper preparation is truly vital – without prime, filled and secured wood, achieving flawless high-gloss resin layers becomes nearly impossible for beginners.

Mixing and Applying Crystal Clear Epoxy

Once your wood surface is properly prepped, it’s time to begin mixing and pouring on that first layer of crystal clear magic!

• Use Containers: Only use clean, dry plastic containers for mixing – residue from containers can cause curing issues. Disposable plastic cups work perfectly and allow easy waste disposal.
• Combine Thoroughly: Use separate disposable sticks for the measured resin and hardener, then mix together extremely thoroughly – all resin/hardener must contact each other to properly cure. Set a timer and keep mixing for 5+ minutes.
• First Thin Layer: Use foam brushes, rollers or spreading tools to apply initial layer at approximately 1/8 inch thickness max. Too thick of an initial pour may cure improperly or bubble.
• Pop Bubbles: Use torch to quickly pass over surface which will “pop” air bubbles. Be extremely careful not to linger too long in one spot with the flame.
• Second Layer: After recommended cure time passes (6-12 hours on average), sand lightly with extra fine (220+) sandpaper. Wipe clean and pour second thicker layer up to 1/4 inch. Allow to fully cure 72 hours.

Ideally three layers of resin are poured for best protection, with light sanding between each layer – especially for surfaces like heavy-use bar tops or dining tables. Additional thin layers build protection and deepen the glossy shine.

Taking Wood Finishing in Dazzling Directions

One of the most exciting aspects of epoxy resin is the virtually endless options for custom colorful, textured and multi-dimensional looks:

Creative Color Effects

• Add transparent alcohol ink, liquid pigments or powdered mica powder to tint clear epoxy resin any hue imaginable before pouring onto wood. Experiment with mixing custom colors.
• Try swirling together two or more differently colored batches into rivers, stone patterns or clouds
• Top with metallic powders like gold leaf flakes between layers
• Mask off wood sections with painter’s tape to pour alternating colors

Texture and Dimension

• Sprinkle or push materials like colored sand, minerals, dried flowers or coffee beans into a layer before hardening
• Press items like coins, sea shells or photos into resin layers for memorabilia
• Create rivers with wire, glass noodles or stringers between epoxy layers
• Top with metallic powders like gold leaf flakes between layers

Endless combinations of textures, photographs and color variations means epoxy resin finishing allows woodworkers flex their artistic muscles for truly custom show-stopping kitchen and dining tables, stunning bar tops, charcuterie boards with resin rivers…let your imagination run wild!

And don’t worry – even coating failures often result in unexpectedly beautiful abstract effects. Creativity and fearlessness is key!

Additional Tips for Pro-Level Results

Here are a few additional tips and tricks shared by expert resin crafters to take wood finishing to the next level:

• After surface preparation, consider sealing porous surfaces with a thin clear spray paint layer. This further prevents bubbles from being released from wood into resin pour.
• Buying or building simple wooden cradle frames allows you to pour resin on wood off the surface. This prevents drips and allows back/side coatings.
• Pay attention to cure times before recoating – wait too little and layers don’t bond correctly. Too long makes adhesion troublesome without heavy sanding.
• Use masking tape to section off straight lines if wanting sharp contrasting resin colors on a large surface like a table or bar.
• Always pour least viscous liquids first if combining additives – liquified mica powders, inks, then thicker items like dried flowers or shells.

Conclusion

After reading this complete guide on the principles of resin finishing for wood surfaces, you should feel equipped to tackle epoxy coating with confidence. Remember, the keys are proper preparation, using compatible products, mixing sufficiently, and applying in thin layers. Patience as each layer fully cures is also imperative.

While the process requires precision, the payoff of shiny glass-like finishes with creative color effects makes epoxy resin finishing well worth learning. Just be sure to practice on scrap wood first! Finally, don’t be afraid to get creative – no two hand-poured resin projects look exactly alike.

Have any lingering questions? Read on for commonly asked questions about perfecting wood finishing with epoxy resin.

Frequently Asked Questions

What is the difference between epoxy and polyurethane?

Epoxy forms a plastic-like coat bonding tight to the wood surface. It cures to an ultra thick, glassy finish better for extreme use items like bars/tables. Polyurethane contains oil for a thinner, slightly softer finish, ideal for items like dressers and flooring.

How thick should each poured epoxy coating layer be?

Each layer should be 1/8 to 1/4 inches maximum in thickness to prevent hot spots from too much heat accumulation as resin cures. Multiple thin coats are far better than fewer thicker pours for best clarity.

Can epoxy resin be used outdoors?

Yes, but consider a resin designed for outdoor use with UV inhibitors to prevent yellowing or coat with a special UV resistant topcoat. Areas with intense sunlight may still amber over time.

How long does epoxy resin last on wood?

When using quality coating resin and properly preparing surfaces, one application can last 5-10 years or more on indoor surfaces with average wear and tear. Bars or dining tables may need recoating after several years.

Can epoxy resin be used over stains or paint?

Yes, both stains and paints work well for adding color underneath clear epoxy finishes. Be sure they are oil-based for proper adhesion and fully cured first.

How do you remove epoxy resin if redo is needed?

Unfortunately epoxy can’t be removed with chemical strippers. Sanding with power tools or scraping away the coating is required, so prevent drips!

What safety gear should be used when applying resin?

Nitrile gloves, N95 face masks or respirators, safety glasses and proper ventilation is vital, especially when using torch for bubbles. Fumes can cause issues for those sensitive.

Further Reading

• Video overview – – Rock-N-Wood Shop Series
• Article – Woodworking Mistakes to Avoid from Our Community